key features feature advantages wideband, 600 to 6000 mhz ZN6PD1-63SMP+ supports bandwidth requirements for a wide variety of applications. ultra-thin case design, 9.50 x 4.25 x 0.43 saves space in crowded system layouts. blind mate, snap-on smp connectors blind mate smp connectors enable direct connection to adjacent modules while facilitating thin case height. high power handling: ? 20w as a splitter ? 1.5w as a combiner suitable for a variety of system power requirements. low insertion loss, 2.0 db provides good signal power transmission, making this model ideal for signal distribution applica - tions where low loss is a requirement. dc passing, 0.6a (100ma each port) supports applications where dc power is needed at later stages in the system. the big deal ? wideband, 600 to 6000 mhz ? low insertion loss, 2.0 db ? high-power handling, 20w as a splitter ? ultra-thin case, 0.43 height (10.92mm) ? smp snap-on connectors product overview mini-circuits ZN6PD1-63SMP+is a 6-way 0? splitter/combiner supporting a wide variety of applications from 600 to 6000 mhz. this model is capable of handling up to 20w rf input power as a splitter and pro - vides low insertion loss, high isolation. it comes housed in an ultra-thin, aluminum alloy case (9.50 x 4.25 x 0.43) with smp snap-on connectors, saving space in crowded system layouts. ZN6PD1-63SMP+ power splitter/combiner 6 way-0 50 ? 600 to 6000 mhz dc pass, ultra-thin case style: uu2372 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
typical performance data maximum ratings coaxial connections sum port s port 1,2,3,4,5,6 1,2,3,4,5,6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 20w max. internal dissipation 2.25w max. dc current 0.6a(100ma for each port) outline drawing outline dimensions ( ) inch mm ZN6PD1-63SMP+ 6 way-0 50 ? 600 to 6000 mhz power splitter/combiner rev. or m160953 ZN6PD1-63SMP+ ed-16102102 jc/td/cp/am 170320 dc pass, ultra-thin a b c d e f g h 4.25 9.50 .43 .15 3.95 .75 8.000 .136 107.95 241.30 10.92 3.81 100.33 19.05 203.20 3.45 j k l m n s wt 2.13 .205 .63 1.88 3.13 0.5 grams 54.10 5.21 16.00 47.75 79.50 12.70 580 case style: uu2372 connectors model smp(snap-on) ZN6PD1-63SMP+ features ? wideband, 600 to 6000 mhz ? snap-on blind mate smp connectors ? low insertion loss, 2.0 db typ. ? good isolation, 20 db typ. ? rugged, shielded case ? up to 20w power input as splitter applications ? high band pcs ? unii ? wimax ? wifi 0.0 0.6 1.2 1.8 2.4 3.0 600 1680 2760 3840 4920 6000 total loss (db) frequency (mhz) zn6pd1 - 63smp+ total loss s-1 s-3 s-5 10 20 30 40 50 60 600 1680 2760 3840 4920 6000 isolation (db) frequency (mhz) zn6pd1 - 63smp+ isolation 1-2 (db) 1-3 (db) 1-6 (db) 1.0 1.2 1.4 1.6 1.8 2.0 600 1680 2760 3840 4920 6000 vswr frequency (mhz) zn6pd1 -63smp+ vswr vswr s vswr 1 vswr 3 frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr 1 vswr 3 s-1 s-3 s-5 1-2 1-3 1-6 electrical schematic permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db theoretical splitter loss. electrical specifcations at 25c parameter frequency (mhz) min. typ. max. unit frequency range 600 6000 mhz insertion loss (above theoretical 7.8 db) 600 - 3000 1.0 1.6 db 3000 - 6000 2.5 3.5 isolation 600 - 6000 14 20 db phase unbalance 600 - 3000 8 12 degree 3000 - 6000 10 18 amplitude unbalance 600 - 3000 0.6 0.8 db 3000 - 6000 0.8 1.4 vswr (port s) 600 - 6000 1.5 :1 vswr (port 1-6) 600 - 6000 1.4 :1 power handling 1 as splitter 20 w as combiner 2 1.5 600.00 0.27 0.51 0.29 0.25 24.93 30.78 26.37 0.86 1.37 1.12 1.10 984.00 0.33 0.82 0.35 0.52 27.10 34.38 30.63 2.64 1.39 1.18 1.48 1176.00 0.38 0.62 0.39 0.24 23.83 31.20 33.86 3.55 1.15 1.20 1.25 1752.00 0.57 0.76 0.56 0.25 27.11 42.50 38.59 5.40 1.18 1.30 1.39 2136.00 0.81 0.86 0.80 0.08 20.64 28.50 41.26 3.86 1.48 1.22 1.37 2520.00 0.98 0.99 0.98 0.10 33.59 32.09 42.71 5.66 1.61 1.45 1.58 3000.00 0.88 0.77 0.84 0.11 24.81 37.56 42.93 4.96 1.05 1.23 1.24 3360.00 0.95 0.72 0.91 0.24 19.79 28.92 36.58 4.87 1.02 1.22 1.25 3840.00 1.24 0.99 1.09 0.25 21.41 28.78 34.45 5.34 1.45 1.16 1.05 4320.00 1.53 1.15 1.37 0.39 32.03 30.01 36.73 5.49 1.39 1.31 1.23 4800.00 2.08 1.56 1.93 0.53 16.84 31.67 44.03 5.32 1.67 1.13 1.19 5040.00 1.82 1.45 1.70 0.37 24.33 31.54 34.99 6.97 1.57 1.23 1.27 5520.00 2.22 1.97 1.98 0.35 20.09 26.78 44.51 7.25 1.42 1.19 1.38 5760.00 2.19 1.93 2.08 0.30 17.96 28.48 31.61 7.77 1.46 1.56 1.22 6000.00 2.59 2.87 2.47 0.39 20.63 23.69 25.90 8.92 1.92 1.52 1.54 (dc through) port s rf+dc port 1 rf+dc port 2 rf+dc port n rf+dc 1. over 25c to 100c. derate linearly to 50% of rating at 100c. 2. as a combiner of non-coherent signals max power per port is 1.5watt power rating divided by number of ports. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
